Network Products

Industrial Network Products

Motor control via network communication can detect the status of the motor directly by data. This results in a shorter development period and increased reliability and maintainability of the equipment. By expanding the network compatible product lineup, Oriental Motor meets diversifying network environments of factory automation.

Network-compatible products offer the following benefit:

Simple wiring achieves space saving for wiring and smaller equipment size.
Transmission distance can be extended making wiring route design easier and enables products to be positioned in appropriate locations.
Simple wiring achieves a reduction in man-hours for the wiring process and in the cost of wiring.
Operating status is monitored by product input/output information, alarm, etc. This achieves improved maintainability via the system.
Simple wiring makes wiring and checking process easier when replacing the product.

Learn more about our αSTEP family of products with Network compatible drivers.

EtherNet/IP™ Compatible Drivers

AZ Series Stored Data drivers now offer EtherNet/IP™ communications for a battery-free, absolute mechanical sensor motor and driver solution.
For use with all Oriental Motor AZ Series motors and linear & rotary actuators equipped with the AZ Series.

Built-in Protective Functions
Monitoring Functions
Support Software for Parameter Setting (free download)
24/48 VDC, Single-Phase 100-120 VAC or Single-Phase/Three-Phase 200-240 VAC
For use with AZ Series Motors & Products

Learn More

_{EtherNet/IP™ is a trademark of ODVA}

EtherCAT Compatible Drivers

AZ Series Stored Data drivers now offer EtherCAT communications for a battery-free, absolute mechanical sensor motor and driver solution.
For use with all Oriental Motor AZ Series motors and linear & rotary actuators equipped with the AZ Series.

Single-Axis and Multi-Axis Drivers
Built-in Protective Functions
Monitoring Functions
Support Software for Parameter Setting (free download)
24/48 VDC, Single-Phase 100-120 VAC or Single-Phase/Three-Phase 200-240 VAC
For use with AZ Series Motors & Products

Learn More

_{EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation}

PROFINET Compatible Drivers

The AZ Series motors can be controlled easily by using the PROFINET communications protocol.
The PROFINET compatible drivers comply with Conformance Class B.
Using the diagnostic tool of the host controller, network diagnostics and topology detection can be performed.
For use with all Oriental Motor AZ Series motors and linear & rotary actuators equipped with the AZ Series.

Built-in Protective Functions
Monitoring Functions
Support Software for Parameter Setting (free download)
24/48 VDC, Single-Phase 100-120 VAC or Single-Phase/Three-Phase 200-240 VAC
For use with AZ Series Motors & Products

Learn More

_{PROFINET is a registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).}

Modbus (RTU)

Modbus is the open field network with Modbus Protocol installed. Modbus is used widely in field of factory and process automation because its protocol specification is open to the public and it is very simple.

RS-485 Communication
Wide Range of Products
Can be used with Network Gateways for Industrial FA Network Communication
Limited ROS support available

Learn More

_{Modbus is a registered trademark of Schneider Automation Inc.}

Modbus (TCP, UDP)

An AZ Series mini Driver compatible with general-purpose Ethernet protocols (Modbus TCP, UDP) can be directly controlled using software, such as Python, from a single board computer, such as Raspberry Pi or JETSON, or a personal computer.

For use with all Oriental Motor AZ Series motors and linear & rotary actuators equipped with the AZ Series.

Direct connection to a single-board computer
Use Python or other languages on host system for quick startup
Support wireless systems over Ethernet

Learn More

_{Modbus is a registered trademark of Schneider Automation Inc.}

Controllers / Network Gateways

The communication protocol of the master controller, Factory Automation (FA) network, is converted to Oriental Motor's own RS-485 communication protocol. Connection to Oriental Motor's network compatible products is completed with one RS-485 communication cable.

Compatible Networks:
CC-Link, MECHATROLINK-II, MECHATROLINK-III, EtherCat

*For use with Stored Data (Network) type

Learn More

Compatible Networks

EtherNet/IP

With the EtherNet/IP driver, the operating data can sent from the host system or can be set in the driver and selected and executed from a host system. Host system connection and control are performed with I/O Stored Data or EtherNet/IP communications.

_{EtherNet/IP™ is a trademark of ODVA}

Learn More

EtherCAT

EtherCAT is an Ethernet (IEEE802.3)-compliant, open, high-speed industrial network system.

_{EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation}

Learn More

PROFINET

With the PROFINET driver, the operating data can sent from the host system or can be set in the driver and selected and executed from a host system. Host system connection and control are performed with I/O Stored Data or PROFINET communications.

_{PROFINET is a registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO).}

Learn More

Modbus (RTU)

_{Modbus is a registered trademark of Schneider Automation Inc.}

Learn More

Modbus (TCP, UDP)

Modbus TCP and Modbus UDP are variants of the Modbus protocol that use different communication protocols to transmit Modbus messages.The message format is the same as Modbus (RTU).

_{Modbus is a registered trademark of Schneider Automation Inc.}