Product Information
Solutions
Technical Information
Motor Sizing
Downloads
Virtual Showroom
Contact Us
Linear Actuators > Rack and Pinion Linear Actuators > Rack and Pinion System L Series - DSC Series Equipped
Rack and Pinion System L Series - AZ Series Equipped
Rack and Pinion System L Series - DSC Series Equipped
The Rack and Pinion System L Series- DSC Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The on-board AC speed control motor allows for reasonable speed control.
- Vertical movement
- 3 Rack Speeds available: 10, 20 or 45 mm/s
- Electromagnetic Brake included
- DSC Series Speed Controller required (sold separately)
Product Lineup
Actuator |
Basic Rack Speed |
Power Supply |
Max. Trans. Mass |
Speed Control Range* |
Stroke |
|
10 |
Single-Phase 100-120 Single-Phase 200-240 |
26 |
1.9 ~ 10 |
100 ~ 800 |
| 20 | 11 |
4.8 ~ 25 |
|||
45 |
6.6 |
9.5 ~ 50 |
|||
|
10 |
Single-Phase 100-120 Single-Phase 200-240 |
67 |
2.2 ~ 11 |
100 ~ 1000 |
| 20 | 33 |
4.5 ~ 23 |
|||
45 |
18 |
9.3 ~ 49 |
*Values shown are for 60 Hz.
Easy to Use Linear Motion Mechanism that is "Compact" and "High Strength"
The Rack and Pinion System can easily convert the motor's rotation to linear motion. The linear motion mechanism has a compact design but it can transport large loads due to its high-strength fabrication.
Shorter Time Between Design to Start-up
The Rack and Pinion System can reduce the number of parts used, and it can also significantly reduce the time spent on design and assembly.
Three Variable Speed Ranges Available
The DSC series AC speed control motor allows for speed control in vertical operation. Select from three variable speed ranges according to the frame size.
Applications
Rack-and-pinion systems, which are applicable to a variety of applications, are user-friendly products that can be selected according to the application needs.
Electromagnetic Brake with Deceleration Feature
These products have built-in power-off activated electromagnetic brakes. When power is accidentally cut off due to a blackout or other unexpected events, the electromagnetic brake holds the load in position to prevent it from dropping or moving. Also, when the motor is at standstill, it can be held by the electromagnetic brake. It is possible to suppress the heat generated from the motor by turning off the motor current.
Always ensure the Deceleration Feature is turned on.
Deceleration Control Function (Electromagnetic Brake Type)
This function applies brake current automatically to regulate the speed when the motor rotates faster than the set speed. Ideal for vertical, gravitational or horizontal operations. Can also be used for position holding.
DSC Series AC Speed Controller
Unique to Oriental Motor, the DSC Series offers closed loop control. The display and digital setting features are built into this compact driver.
- Compact and Cost Effective
- Advanced Controller with simple data input and digital indicator built in
- Easy to control, digitally or manually, up to 20 units from one control method
- Closed loop system for reliable performance and CPU controlled for improved speed regulation
- Vertical Operation is possible
- Single-Phase 100-120 or 200-240 VAC
- Capacitor included
Sensor Set
This is a compact sensor that takes into consideration the installation space. It is easy to detect the rack position.
Item |
Frame Size |
60 mm |
|
80 mm |
Limit Switch Set
Reciprocating motion can be performed easily.
Connection / Extension Cables
These cables extend the distance between the motor and controller. Use flexible connection cable in applications where the cable is bent or flexed.
*Connection cables required (sold separately).
System Configuration
Product Number Code
CAD / Manual Search
To locate product CAD and Operator Manuals please search using the product Item Number.
Speed Controllers
